How do I add a location and assign a node?

Go to Settings -> Add/Modify Node Locations and add the locations where nodes are located To add a location you need to click on the image at the location that you want to add. If the node picture that appears when you click the image is to large or to small it can be changed…

How do I add or modify sensor calibrations.

You can add or modify most of the calibrations from the Settings -> Add/Modify Sensors and Calibrations. One common method is to create new sensors and name them based on the calibration (ex. 10HS-Snap dragon)

What radio settings should I use for EM-50r and nR5 nodes?

Please make sure that the radio is set to Confirm Delivery mode and that the measurement interval is not 0. We typically recommend a measurement interval of 5 or 15 minutes depending on you granular you need the sensor data. Also you should note which channel and sub-channel are being used by the radio. All…